Arduino Thermostat Shield (out of stock)
Arduino Thermostat Shield (out of stock)
€ 15.50
Quantity:
Shipping from the EU.
Arduino Thermostat Gateway can be used for building DIY OpenTherm Thermostat.
You just need to follow these simple steps:
- Solder corresponding headers, screw therminal blocks to Master OpenTherm Shield and solder it on top of Arduino OpenTherm Shield
- Stack Arduino Thermostat Shield on Arduino Uno or Mega board
- Install OpenTherm Library into Arduino IDE
- Flash sample sketch
| Component | Pieces |
|---|---|
| Master OpenTherm Shield | 1 |
| Arduino OpenTherm Shield | 1 |
| Themperature sensor DS18B20 | 1 |
| Single Row Male 2.54mm Breakable Pin Header Connector 10Pin | 1 |
| Single Row Male 2.54mm Breakable Pin Header Connector 8Pin | 2 |
| Single Row Male 2.54mm Breakable Pin Header Connector 6Pin | 1 |
| Screw Terminal Block Connector KF128-2P 3.81mm 2Pin | 1 |
| Shipping method | Estimated Time | Fees |
|---|---|---|
|
|
12-15 days | €5.5 |
Related Products
OpenTherm Thermostat 2
€40.00
OpenTherm Thermostat
€30.00
© 2020 - DIYLESS Electronics - Shipping - Refund Policy - Privacy
